Abstract: Commercial polypropylene fibers are incorporated as reinforcement of cement-based materials to improve their mechanical and damage performances related to properties such as tensile and flexural strength, toughness, spalling and impact resistance, delay formation of cracks and reducing crack widths. Yet, the production of these polypropylene fibers generates economic costs and environmental impacts and, therefore, the use of alternative and more sustainable fibers has become more popular in the research materials community. This paper addresses the characterization of recycled polypropylene fibers (RPFs) obtained from discarded domestic plastic sweeps, whose morphological, physical and mechanical properties are provided in order to assess their implementation as fiber-reinforcement in cement-based mortars. An experimental program addressing the incorporation of RPFs on the mechanical-damage performance of mortars, including a sensitivity analysis on the volumes and lengths of fiber, is developed. Using analysis of variance, this paper shows that RPFs statistically enhance flexural toughness and impact strength for high dosages and long fiber lengths. On the contrary, the latter properties are not statistically modified by the incorporation of low dosages and short lengths of RPFs, but still in these cases the incorporation of RPFs in mortars have the positive environmental impact of waste encapsulation. In the case of average compressive and flexural strength of mortars, these properties are not statistically modified when adding RPFs.

Abstract: This paper addresses an economic study of the installation of photovoltaic (PV) solar panels for residential power generation in Santiago, Chile, based on the different parameters of a PV system, such as efficiency. As a performance indicator, the Levelized Cost of Energy (LCOE) was used, which indicates the benefit of the facility vs. the current cost of electrical energy. In addition, due to a high level of airborne dusts typically associated with PM10, the effect of the dust deposition on PV panels' surfaces and the effect on panel performance are examined. Two different scenarios are analyzed: on-grid PV plants and off-grid PV plants.

Abstract: Water scarcity is becoming a global challenge to attempts to narrow the water demand-supply gap. To overcome this problem, it is sensible to consider alternative technologies that can exploit non-conventional water resources. The choice of such technologies should be, however, carefully analyzed, because any choice might be unfeasible from an economic point of view. In this work, a methodology to select the most appropriate non-conventional water resource, out of municipal wastewater and seawater, was proposed. Specifically, we attempted to determine which alternative provides cheaper water supply and production costs for domestic uses, depending on the wastewater treatment system used and the water plant capacity. The production of water under three scenarios was analyzed: (i) a city that has a conventional wastewater treatment plant (WWTP); (ii) a city that uses primary treatment and submarine outfalls to treat municipal wastewater; (iii) seawater desalination. The proposed methodology was tested in Chilean cities that are located in areas where water is a scarce resource. The results showed that the reuse of municipal wastewater represents a cost-competitive alternative to seawater desalination, mainly when municipal wastewater is treated in a conventional WWTP and when water flow demand is higher than 1500 m(3)/d. In contrast, seawater desalination becomes more profitable than wastewater reuse when the treatment of municipal wastewater is based on the use of submarine outfalls. This study provides a useful economic tool for promoting municipal wastewater reuse as a non-conventional water source for supplying water to cities that suffer from water scarcity in Chile and in similar areas of the world.

Abstract: Urban residual flows contain significant amounts of valuable nutrients, which, if recovered, could serve as input for the own city needs or those of its immediate surroundings. In this study, the possibilities for decentralized recovery of nutrient rich residual flows in Santiago, Chile, are studied by means of a case study considering technical and socio-economic criteria. In particular, we calculate circularity indicators for organic matter (OM), nitrogen (N), and phosphorus (P) and cost-benefits of household and community on-site technological alternatives. Kitchen waste (KW) and garden residues (GR) as well as urine were considered as system inputs whereas urban agriculture, municipality green, or peri-urban agriculture were the considered destinations for nutrients recovered. The technologies studied were anaerobic digestion, vermicomposting, and composting, while urine storage and struvite precipitation were considered for nutrient recovery from urine. Material flow analysis was used to visualize the inputs and outputs of the baseline situation (the traditional urban waste management system), and of the different household and municipality resource recovery scenarios (the decentralized valorization systems). Our findings show that decentralized valorization of KW and GR are a clear win-win policy, since they can not only produce important environmental benefits for the city in the long run, but also important cost savings considering the landfill fees and residues transportation of the current centralized waste management system.

Abstract: There have been efforts to use building demolition waste as an alternative aggregate in concrete to decrease the use of natural resources for construction. The World Green Building Council estimates that the construction industry is responsible for more than 50% of all material extracted globally and that construction and demolition waste makes up 35% of global landfills. As a result, incorporating recycled aggregate (RA) in concrete production is a prudent course of action to reduce the environmental impact. This study reviews prior research on using recycled aggregate instead of conventional ingredients in concrete. The composition and morphology of different types of RA, the behavior of RA in fresh and hardened states, keyword co-occurrence and evolution analysis, and the various additives used to enhance the inferior properties of RA are discussed. The RA showed different physical properties when compared with natural aggregate. However, the addition of pozzolanic materials and various pretreatment techniques is desirable for improving the inferior properties of RA. While building waste has been utilized as a substitute for fine and coarse aggregate, prior research has demonstrated that a modified mixing approach, an adequate mixing proportion, and the optimum replacement of cementitious materials are necessary. Based on the review, the recommendation is to use RA at a replacement level of up to 30% and the addition of precoated and pozzolanic materials as a treatment to provide concrete with adequate workability, strength, and durability for structural applications.

Abstract: Small-medium enterprises (SMEs) represent 90% of business globally. Digital Transformation (DT) affects SMEs differently from larger companies because although SMEs have more flexibility and agility for adapting to new circumstances, they also have more limited resources and specialization capabilities. Thus, it is fundamental to measure SMEs' performance considering different perspectives. Here, we describe and analyze the state-of-the-art of DT in SMEs, focusing on performance measurement. We center on whether the tools used by SMEs encompass the triple bottom line of sustainability (i.e., environmental, social, and economic aspects). To do so, in December 2021, we performed a comprehensive systematic literature review (SLR) on the Web of Science and Scopus. In addition, we also explored a novel approach for SLR: topic modeling with a machine learning technique (Latent Dirichlet Allocation). The differences and interchangeability of both methods are discussed. The findings show that sustainability is treated as a separate topic in the literature. The social and environmental aspects are the most neglected. This paper contributes to sustainable development goals (SDGs) 1, 5, 8, 9, 10, and 12. A conceptual framework and future research directions are proposed. Thus, this paper is also valuable for policymakers and SMEs switching their production paradigm toward sustainability and DT.

Abstract: The development of rooftop solar PV generation has significant potential to generate enormous benefits to the electricity systems in achieving emission reduction targets and meeting increasing global energy demand, but could also make the power systems more resilient and affordable. In 2012, the Chilean government introduced a net billing law (Law 20.517) to incentivize consumers to sell their excess renewable electricity into the grid, which was expected to lead to a significant growth in rooftop solar. However, to date, the advancement of these technologies in the country has been very limited due to various barriers. For this reason, identifying and mitigating the main barriers that impede the advancement of development of rooftop solar is necessary to allow the successful deployment of these technologies. Based on data collected from a questionnaire survey and interviews conducted among the project developers in rooftop solar, the authors identify and rank the major barriers to the adoption of these technologies in Chile. Our findings show that the most significant barriers include “high investment and recovery period for the customer”, “lack of incentives to develop projects in the sector”, “rigid regulations regarding project size”, and “long administrative process and grid connection costs”. Furthermore, we discuss the most critical barriers in detail together with policy recommendations to overcome them.

Abstract: This paper shows how system design determines sustainability outcomes of cassava bioethanol production in Colombia. The recovery of the energy contained in by-products is recommended as compared to single product production. In particular, this study assesses the energy, greenhouse gases, water, and land use performance of alternative cassava cascades working at different scales, highlighting the implications of including anaerobic digestion technology in the chain. The centralized systems showed a poorer energy and greenhouse gases performance as compared to decentralized ones in part due to the artificial drying of cassava chips in the centralized facility. Under solar drying of cassava chips, systems with anaerobic digestion produced three to five times more energy than demanded and produced greenhouse gas savings of 0.3 kgCO(2eq) L EtOH-1. The water balance output depends upon the water reuse within the ethanol industry, which demands 21-23 L EtOH-1. In the anaerobic digestion scenarios, assuming liquid flows are treated separately, complete water recovery is feasible. Land use for cassava cultivation was calculated to be 0.27-0.35 ha tEtOH(-1). The energy and water content of the material to digest, the options for digestate reuse, and the recovery of the methane produced are major considerations substantially influencing the role of anaerobic digestion within cassava cascade configurations.

Abstract: Reversible logic enables ultra-low power circuit design and quantum computation. Quantum-dot Cellular Automata (QCA) is the most promising technology considered to implement reversible circuits, mainly due to the correspondence between features of reversible and QCA circuits. This work aims to push forward the state-of-the-art of the QCA-based reversible circuits implementation by proposing a novel QCA design of a reversible full adder\full subtractor (FA\FS). At first, we consider an efficient XOR-gate, and based on this, new QCA circuit layouts of Feynman, Toffoli, Peres, PQR, TR, RUG, URG, RQCA, and RQG are proposed. The efficient XOR gate significantly reduces the required clock phases and circuit area. As a result, all the proposed reversible circuits are efficient regarding cell count, delay, and circuit area. Finally, based on the presented reversible gates, a novel QCA design of a reversible full adder\full subtractor (FA\FS) is proposed. Compared to the state-of-the-art circuits, the proposed QCA design of FA\FS reversible circuit achieved up to 57% area savings, with 46% and 29% reduction in cell number and delay, respectively.