Corral, N., Anrique, N., Fernandes, D., Parrado, C., & Caceres, G. (2012). Power, placement and LEC evaluation to install CSP plants in northern Chile. Renew. Sust. Energ. Rev., 16(9), 6678–6685.
Abstract: Chile is expecting a 5.4% growth in energy consumption per year until 2030, requiring new and better solutions for the upward trend of its electricity demand. This state leads to select and study one of the potential alternatives for electricity generation: concentrated solar power (CSP) plants. Such renewable technology found in Chile a very favorable condition. Recent researches indicate Atacama Desert as one of the best regions for solar energy worldwide, having an average radiation higher than in places where CSP plants are currently implemented, e.g. Spain and USA. The aim of this study is to present an analysis of levelized energy cost (LEC) for different power capacities of CSP plants placed in distinct locations in northern Chile. The results showed that CSP plants can be implemented in Atacama Desert with LECs around 19 (sic)US$/kWh when a gas-fired backup and thermal energy storage (TES) systems are fitted. This value increases to approximately 28 (sic)US$/kWh if there is no backup system. (C) 2012 Elsevier Ltd. All rights reserved.
|
Parrado, C., Caceres, G., Bize, F., Bubnovich, V., Baeyens, J., Degreve, J., et al. (2015). Thermo-mechanical analysis of copper-encapsulated NaNO3-KNO3. Chem. Eng. Res. Des., 93, 224–231.
Abstract: The present paper presents a numerical study to investigate and assess the heat transfer behavior of a copper and salt composite. A mixture of nitrates, KNO3-NaNO3, within a deformable spherical shell coating of copper will be used as an encapsulated phase change material, E-PCM. In the context of a thermo-mechanical analysis of this E-PCM, a simulation is proposed to determine its storage capacity and properties The melting, or solidification of the encapsulated PCM particles do not provoke cracking of the deformable shell. (C) 2014 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
|
Parrado, C., Girard, A., Simon, F., & Fuentealba, E. (2016). 2050 LCOE (Levelized Cost of Energy) projection for a hybrid PV (photovoltaic)-CSP (concentrated solar power) plant in the Atacama Desert, Chile. Energy, 94, 422–430.
Abstract: This study calculates the LCOE (Levelized Cost of Energy) on the PSDA (Atacama Solar Platform) for a solar-solar energy mix with the objective of evaluate new options for continuous energy delivery. LCOE was calculated for three 50 MW (megawatt) power plants: A PV (photovoltaic), a CSP (concentrated solar power) plant with 15 h TES (thermal energy storage) and a hybrid PV-CSP plant constituted with 20 MWp of PV and 30 MW of CSP with 15 h TES. Calculations present two scenario projections (Blue Map and Roadmap) until 2050 for each type of plant. Due to the huge solar resource available in northern Chile, the PV-CSP hybrid plant results to be a feasible option for electricity generation, as well as being effectively able to meet electricity demand profile of the mining industry present in the area. This type of energy could mitigate long-term energy costs for the heavy mining activity, as well as the country CO2 emissions. Findings point out that PV-CSP plants are a feasible option able to contribute to the continuous delivery of sustainable electricity in northern Chile. Moreover, this option can also contribute towards electricity price stabilization, thus benefiting the mining industry, as well as reducing Chile's carbon footprint. (C) 2015 Elsevier Ltd. All rights reserved.
|
Simon, F., Ordonez, J., Girard, A., & Parrado, C. (2019). Modelling energy use in residential buildings: How design decisions influence final energy performance in various Chilean climates. Indoor Built Environ., 28(4), 533–551.
Abstract: To reduce the energy consumption in buildings, there is a demand for tools that identify significant parameters of energy performance. The work presents the development and validation of a simulation model, called MEEDI, and graphical figures for the parametric sensitivity investigation of energy performance in different climates in Chile. The MEEDI is based on the ISO 13790 monthly calculation method of building energy use with two improved procedures for the calculation of the heat transfer through the floor and the solar heat gains. The graphical figures illustrate the effects of climate conditions, envelope components and window size and orientation on the energy consumption. The MEEDI program can contribute to find the best solution to increase energy efficiency in residential buildings. It can be adapted for various parameters, making it useful for future projects. The economic viability of specific measures for building envelope materials was analysed. Payback periods range from 5 to 27 years depending on the location and energy scenario. The study illustrates how building design decisions can have a significant impact on final energy performance. With simple envelope components modification, valuable energy gains and carbon emission reductions can be achieved in a cost-effective manner in Chile.
|
