|
Araya-Letelier, G., Antico, F. C., Burbano-Garcia, C., Concha-Riedeld, J., Norambuena-Contreras, J., Concha, J., et al. (2021). Experimental evaluation of adobe mixtures reinforced with jute fibers. Constr. Build. Mater., 276(2021), 122127.
Abstract: Due to their sustainability as well as physical and mechanical performance, different natural fibers, both vegetal and animal fibers, have been successfully used in adobe mixtures (AMs) to enhance properties such as cracking control, flexural toughness and water erosion resistance, among others. However, the use of jute fibers (JFs), one of the most largely produced vegetal fiber worldwide, has not been extensively studied on AMs. Consequently, this study evaluates the effects of the incorporation of varying dosages (0.5 and 2.0 wt%) and lengths (7, 15, and 30 mm) of JFs on the physical/thermal/mechanical/fracture and durability performance of AMs, a specific type of earth-based construction material widely used globally. Experimental results showed that the incorporation of 2.0 wt% dosages of JFs increased the capillary water absorption of AMs, which might affect AM durability. The latter result could be explained by the additional porosity generated by the spaces left between the JFs and the matrix of adobe, as well as the inherent water absorption of the JFs. The incorporation of JFs significantly improved the behavior of AMs in terms of thermal conductivity, drying shrinkage cracking control, flexural toughness and water erosion performance, without affecting their compressive and flexural strength. For example, flexural toughness indices were increased by 297% and crack density ratio as well as water erosion depth values were reduced by 93% and 62%, respectively, when 2.0 wt%-15 mm length JFs were incorporated into AM. Since the latter combination of JF dosage and length provided the overall best results among AMs, it is recommended by this study as JF-reinforcement scheme for AMs for construction applications such as adobe masonry and earth plasters.
|
|
|
Araya-Letelier, G., Antico, F. C., Carrasco, M., Rojas, P., & Garcia-Herrera, C. M. (2017). Effectiveness of new natural fibers on damage-mechanical performance of mortar. Constr. Build. Mater., 152, 672–682.
Abstract: Addition of fibers to cement-based materials improve tensile and flexural strength, fracture toughness, abrasion resistance, delay cracking, and reduce crack widths. Natural fibers have recently become more popular in the construction materials community. This investigation addresses the characterization of a new animal fiber (pig hair), a massive food-industry waste worldwide, and its use in mortars. Morphological, physical and mechanical properties of pig hair are determined in order to be used as reinforcement in mortars. A sensitivity analysis on the volumes of fiber in mortars is developed. The results from this investigation showed that reinforced mortars significantly improve impact strength, abrasion resistance, plastic shrinkage cracking, age at cracking, and crack widths as fiber volume increases. Other properties such as compressive and flexural strength, density, porosity and modulus of elasticity of reinforced mortars are not significantly affected by the addition of pig hair. (C) 2017 Elsevier Ltd. All rights reserved.
|
|
|
Araya-Letelier, G., Concha-Riedel, J., Antico, F. C., & Sandoval, C. (2019). Experimental mechanical-damage assessment of earthen mixes reinforced with micro polypropylene fibers. Constr. Build. Mater., 198, 762–776.
Abstract: The addition of engineered polypropylene fibers to earthen materials offers new opportunities to control their damage evolution and mechanical properties that altogether provides more reliability and extends the life span of these materials. The latter is of special interest considering that earthen materials are still widely used in the form of adobe blocks for earthen masonry, cob, rammed earth or even earthen mortars for new construction and conservation of historic buildings. In this work, the effect of dosage of micro polypropylene fibers (MPPF) in the damage-mechanical performance of earthen mixes is studied experimentally. Part of the experiments includes two different tests to assess distributed and localized cracking of reinforced earth subject to restrained drying shrinkage. In addition, the experimental results showed that the incorporation of MPPF increases up to 83 times the impact strength and 11 times the flexural toughness of earthen mixes. Other mechanical properties such as compressive and flexural strength are not statistically affected by the incorporation of MPPF. (C) 2018 Elsevier Ltd. All rights reserved.
|
|
|
Araya-Letelier, G., Concha-Riedel, J., Antico, F. C., Valdes, C., & Caceres, G. (2018). Influence of natural fiber dosage and length on adobe mixes damage-mechanical behavior. Constr. Build. Mater., 174, 645–655.
Abstract: This study addresses the use of a natural fiber (pig hair), a massive food-industry waste, as reinforcement in adobe mixes (a specific type of earthen material). The relevance of this work resides in the fact that earthen materials are still widely used worldwide because of their low cost, availability, and low environmental impact. Results show that adobe mixes' mechanical-damage behavior is sensitive to both (i) fiber dosage and (ii) fiber length. Impact strength and flexural toughness are increased, whereas shrinkage distributed crack width is reduced. Average values of compressive and flexural strengths are reduced as fiber dosage and length increase, as a result of porosity generated by fiber clustering. Based on the results of this work a dosage of 0.5% by weight of dry soil using 7 mm fibers is optimal to improve crack control, flexural toughness and impact strength without statistically affecting flexural and compressive strengths. (C) 2018 Elsevier Ltd. All rights reserved.
|
|
|
Araya-Letelier, G., Maturana, P., Carrasco, M., Antico, F. C., & Gomez, M. S. (2019). Mechanical-Damage Behavior of Mortars Reinforced with Recycled Polypropylene Fibers. Sustainability, 11(8), 17 pp.
Abstract: Commercial polypropylene fibers are incorporated as reinforcement of cement-based materials to improve their mechanical and damage performances related to properties such as tensile and flexural strength, toughness, spalling and impact resistance, delay formation of cracks and reducing crack widths. Yet, the production of these polypropylene fibers generates economic costs and environmental impacts and, therefore, the use of alternative and more sustainable fibers has become more popular in the research materials community. This paper addresses the characterization of recycled polypropylene fibers (RPFs) obtained from discarded domestic plastic sweeps, whose morphological, physical and mechanical properties are provided in order to assess their implementation as fiber-reinforcement in cement-based mortars. An experimental program addressing the incorporation of RPFs on the mechanical-damage performance of mortars, including a sensitivity analysis on the volumes and lengths of fiber, is developed. Using analysis of variance, this paper shows that RPFs statistically enhance flexural toughness and impact strength for high dosages and long fiber lengths. On the contrary, the latter properties are not statistically modified by the incorporation of low dosages and short lengths of RPFs, but still in these cases the incorporation of RPFs in mortars have the positive environmental impact of waste encapsulation. In the case of average compressive and flexural strength of mortars, these properties are not statistically modified when adding RPFs.
|
|
|
Avudaiappan, S., Moreno, P. I. C., Montoya, R. L. F., Chávez-Delgado, M., Arunachalam, K. P., Guindos, P., et al. (2023). Experimental investigation on the physical, microstructural, and mechanical properties of hemp limecrete. Sci. Rep., 13(1), 22650.
Abstract: This paper investigates the hemp limecrete mechanical and microstructural performance of a new sustainable and environmental friendly building material. Several studies have investigated the hemp limecrete focusing on the non-structural applications. The newly developed hemp limecrete consists of high mechanical and microstructural properties. The specimens were prepared with varying lengths and proportions of hemp fibers with lime and tested for compressive strength, flexural strength, thermal conductivity and microstructural analysis like SEM and EDS. The study found that the optimal fiber content for making mortars was between 2 and 4%. This conclusion was reached after analyzing the influence of fiber length and ratio on the properties of the mortars. The dry unit weight decreased when the fiber content was higher than 4%. In terms of strength, the study found that the flexural strength of the hemp limecrete improved with an increase in fiber ratio, but the compressive strength decreased. However, with 2% hemp fiber, compressive strengths of 3.48 MPa and above were obtained. The study also highlighted the good thermal insulation properties and dimensional stability of hemp limecrete. These findings have important implications for the use of hemp limecrete as a sustainable building material. The results suggest that hemp limecrete has the potential to be a viable alternative to conventional concrete in specific applications, particularly in areas where environmental sustainability is a priority.
|
|