Abstract: In 2000, Chile introduced profound health reforms to achieve a more equitable and fairer system (GES plan). The reforms established a maximum waiting time between diagnosis and treatment for a set of diseases, described as an opportunity guarantee within the reform. If the maximum waiting time is exceeded, the patient is referred to another (private) facility and receives a voucher to cover the additional expenses. This voucher is paid by the health provider that had to do the procedure, which generally is a public hospital. In general, this reform has improved the service for patients with GES pathologies at the expense of patients with non-GES pathologies. These new conditions create a complicated planning scenario for hospitals, in which the hospital's OR Manager must balance the fulfillment of these opportunity guarantees and the timely service of patients not covered by the guarantee. With the collaboration of the Instituto de Neurocirugia, in Santiago, Chile, we developed a mathematical model based on stochastic dynamic programming to schedule surgeries in order to minimize the cost of referrals to the private sector. Given the large size of the state space, we developed an heuristic to compute good solutions in reasonable time and analyzed its performance. Our experimental results, with both simulated and real data, show that our algorithm performs close to optimum and improves upon the current practice. When we compared the results of our heuristic against those obtained by the hospital's OR manager in a simulation setting with real data, we reduced the overtime from occurring 21% of the time to zero, and the non-GES average waiting list's length from 71 to 58 patients, without worsening the average throughput.

Abstract: In the present paper, the finite element method is used to perform an exhaustive analysis of the thermal behavior of encapsulated phase change materials (EPCMs), which includes an assessment of several materials in order to identify the best combination of PCM and shell material in terms of thermal energy storage, heat transfer rate, cost of materials, limit of pressure that they can support and other criteria. It is possible to enhance the heat transfer rate without a considerable decrease of the thermal energy storage density, by increasing the thickness of the shell. In the first examination of thermomechanical coupling effects, the technical feasibility can be determined if the EPCM dimensions are designed considering the thermal expansion and the tensile strength limit of the materials. Moreover, when a proper EPCM shell material and PCM composition is used, and compared with the current storage methods of concentrated solar power (CSP) plants, the use of EPCM allows one to enhance significantly the thermal storage, reaching more than 1.25 GJ/m(3) of energy density.

Abstract: The variation of ambient pressure is a potential tool for studying the driving parameters of fire dynamics and heat release in low-pressure environments such as high-altitude locations, aircraft, and spacecraft. The study of upward flame spread over a solid fuel has direct implications on material flammability and fire development, and low pressure environments have recently gained more attention for the possible comparison with the reduced gravity conditions encountered during space missions. In this work, we consider upward spreading flames over thin acrylic sheets in ambient pressures between 30 and 100 kPa. A forced flow velocity of 20 cm/s is added to the naturally-driven buoyant flow, creating a mixed flow field (natural and forced) that varies with pressure. Flame characteristics such as spread rate and standoff distance are measured from the video analysis of the experiments. It is observed that the former decreases with pressure while the latter increases. The larger flame stand-off distance at low pressures partially explains the decrease of the flame spread rate since the convective heat flux from the flame to the solid decreases. Additionally, volumetric concentrations of the combustion products are measured during the experiments. The results show lower O-2 consumption and CO2 production rates at lower pressures. Based on these rates, we could calculate the heat release rate from upward spreading flames at low pressure, providing fundamental information for better understanding pressure-gravity correlations. According to the results, the volumetric heat release rate is proportional to pressure, which is consistent with previous studies on pressure modeling of fires. This suggests that chemical kinetics is not a constraint for the conditions tested in this study, which could help make future flammability tests comparable to low gravity ones.

Abstract: Thermal energy storage is an expanding field within the subject of renewable energy technologies. After a listing of the different possibilities available for energy storage, this paper provides a comparison of various materials for High Temperature Thermal Energy Storage (HTTS). Several attributes and needs of each solution are listed. One in particular is using the latent heat as one of the most efficient ways to store thermal energy. The mixture of phase change material (PCM) embedded in a metal foam is optimising the thermal properties of the material for latent heat energy storage. The results of previous studies show that mechanical and thermal properties of foam were extensively studied separately. This paper highlights the potential for an advanced study of thermo-mechanical properties of metal foams embedded with PCM. (c) 2012 Elsevier Ltd. All rights reserved.

Abstract: This article investigates the feasibility of achieving higher performance from ground-source heat-pumps (GSHP) in space heating mode through the use of solar thermal collectors. A novel simulation tool for solar-assisted ground-source heat-pumps (SGSHP) is presented with an analysis of the influence of solar collectors on the improvement of heat pump performance. Solar radiation and climate temperature data of 19 European cities were used to perform simulations of SGSHP and GSHP systems considering a typical residential house. Overall performance coefficients (COPsys) varied from northern to southern locations between 4.4 and 5.8 for SGSHP and between 4.3 and 5.1 for GSHP. Results show that solar collectors coupling has more impact on performance improvement in regions that benefit from higher irradiance. However, greater running cost savings are achieved in milder climate conditions. Both heat-pump systems are able to effectively contribute to carbon footprint reductions for residential buildings, especially in countries where fossil fuels are the primary source of electricity generation. SGSHP payback periods are found between 8.5 and 23 years from northern to southern localities, making such heating system an economic heating option. SGSHPs are best suited for high irradiance and cool climate locations such as the mountainous regions in southern Europe. (C) 2015 Elsevier Ltd. All rights reserved.

Abstract: The theory to predict ignition of solid fuels exposed to incident radiant heat fluxes has permitted to obtain simple correlations of the ignition delay time with the incident heat flux which are useful in practical engineering applications. However, the theory was developed under the assumption that radiation does not penetrate into the solid phase. In the case of semi-transparent solids, where the penetration of radiation plays an important role in the heating and subsequent ignition of the fuel, the predictions of the classical ignition theory are not applicable. A new theory for the piloted ignition of optically thin cylindrical fuels has been developed. The theory uses an integral method and an approximation of the radiative transfer equation within the solid to predict the heating of an inert solid. An exact and an approximate analytical solution are obtained. The predictions are compared with piloted ignition experiments of clear PMMA cylinders. The results indicate that for opticallythin media, the heating and ignition are not sensible to the thermal conductivity of the solid, they are highly dependent on the in-depth absorption coefficient. Using the approximate solution, the correlation 1/t(ig) proportional to (q)over dot(inc)'' was established. This correlation is adequate for engineering applications, and allows the estimation of effective properties of the solid fuel. The form of the correlation that was obtained is due to the integral method used in the solution of the heat equation, and does not imply that the semi-transparent solid behaves like a thermally thin material. The approximate solution presented in this article constitutes a useful tool for pencil-and-paper calculations and is an advancement in the understanding of solid-phase ignition processes. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Abstract: Geographically widespread species must cope with environmental differences between habitats. Information concerning geographic variations in response to climate variability is critical because many morphological, life history and physiological traits show variation across space. Reciprocal transplant experiments have shown to be relevant to evaluate the role of phenotypic plasticity and potential local adaptation in ecophysiological responses when coping with environmental variability. In this study, we characterize through reciprocal transplant experiments the reaction norms of morphological, biochemical, physiological and life-history traits between two intertidal populations of the socioeconomically important mussel Mytilus chilensis, inhabiting contrasting local environments (estuarine vs coastal habitats). We found a gradient in phenotypic plasticity with plastic trait responses in metabolic, ingestion and clearance rates, and in HsP(70) gene expression, and some traits with responses more canalized as growth and calcification rates. This emphasizes that responses not only vary across different local populations but also in different traits in M. chilensis, thus it is difficult to establish an overall trend of the responses at integrated organismal level. Moreover, the synergistic interaction of factors such as salinity and carbonate system parameters evaluated make it necessary to study the response at the population level with emphasis on benthic species important in aquaculture. Finally, field studies such as this one are useful for documenting the patterns of traits variation that occur in nature, identifying possible causes of such variation, and generating testable hypotheses for future controlled experiments. (C) 2017 Elsevier B.V. All rights reserved.

Abstract: There are still many open questions related to the fire behavior of live and dead wildland fuels and their senescence process. We have physically and biochemically studied live and dead pinus radiata needles, their aging process, and their fire behavior using a systematic aging procedure which allows to characterize the evolution of the fuel moisture content and the photosynthetic pigments over time, and to determine the period of time after sample collection in which specimens can be considered to be alive. Results show that pine needles stay alive for up to 12 h after collection if they remain attached to the twigs. The influence of senescence on spontaneous ignition was tested on two bench-scale devices, the I-FIT and the SCALA, under discontinuous and continuous configurations, respectively. Live pine needles showed larger critical heat fluxes than dead needles, while dead and re-hydrated samples have increased critical heat fluxes for greater moisture contents. Experimental results were interpreted with thermal models based on a two-phase description of the fuel layer. We established a correlation of the form 1/t(ig)proportional to q(inc)" for both ignition configurations, which is adequate for engineering applications and allows the estimation of effective properties for wildland fuel beds.

Abstract: This paper presents a thermal power plant retrofitting approach focused on improvements in the operational flexibility of existing combined cycle power plants dedicated to providing thermal energy for medium and low-temperature processes in copper mining facilities. The main motivation for this research was aimed at evaluating the operational flexibility of the electrical industry through sector coupling and its effect on solving the energy sector decarbonization issues. The research evaluates the advantages of hybridization systems for supporting the electrical and mining industries to better predict operations. The proposed approach is based on a dynamic simulation scheme that finds the optimal operating parameters of the combined heat and power (CHP) system, such as location, type, and arrangement of each component of the CHP system. The power plant dynamic simulation model was validated against data available in the literature; it was also characterized by real operational data of the San Isidro II power plant installed in Chile. Several alternatives for the cogeneration plant location, as well as the splitter system design, were investigated and then compared. A cogeneration plant design with two heating modules was selected based on the comparative study performed in this work and its CHP system was evaluated for a load reduction case study. The results were compared against a reference model. The proposed CHP system exhibited improved performance: a minimum of 15% of the exhaust gases are required to supply the thermal energy demand of the electrowinning process when a full load is considered. It was also found that an average decrease of 5% of the mechanical power at each steam turbine stage noted. Finally, the proposed CHP system's average thermodynamic efficiency is found to be 19% greater than the power plant average efficiency. Consequently, an average decrease of 32 500 tons of carbon dioxide emissions per year is predicted.

Abstract: The performance of ground-source heat pumps (GSHP), often expressed as Power drawn and/or the COP, depends on several operating parameters. Manufacturers usually publish such data in tables for certain discrete values of the operating fluid temperatures and flow rates conditions. In actual applications, such as in dynamic simulations of heat pump system integrated to buildings, there is a need to determine equipment performance under operating conditions other than those listed. This paper describes a simplified methodology for predicting the performance of GSHPs using multiple regression (MR) models as applicable to manufacturer data. We find that fitting second-order MR models with eight statistically significant x-variables from 36 observations appropriately selected in the manufacturer catalogue can predict the system global behavior with good accuracy. For the three studied GSHPs, the external prediction error of the MR models identified following the methodology are 0.2%, 0.9% and 1% for heating capacity (HC) predictions and 2.6%, 4.9% and 3.2% for COP predictions. No correlation is found between residuals and the response, thus validating the models. The operational approach appears to be a reliable tool to be integrated in dynamic simulation codes, as the method is applicable to any GSHP catalogue data. (C) 2016 Elsevier Ltd. All rights reserved.