Fullenkamp, K., Montane, M., Caceres, G., & Araya-Letelier, G. (2019). Review and selection of EPCM as TES materials for building applications. Int. J. Sustain. Energy, 38(6), 561–582.
Abstract: In order to improve the thermal efficiency of building thermal energy storage (TES) systems, the feasibility of using encapsulated phase change materials (EPCMs) as heat storage media is analysed in this work. Specifically, the finite element method is used to perform thermal behaviour analyses of several EPCMs. These analyses include technical and economic assessments in order to identify the best combination of PCM and shell material, using as main parameters: thermal energy storage, heat transfer rate, materials cost, among others. The results show that EPCMs composed by Na2SO4 center dot 6H(2)O as PCM and covered by stainless steel highlight as TES materials.
|
Parrado, C., Caceres, G., Bize, F., Bubnovich, V., Baeyens, J., Degreve, J., et al. (2015). Thermo-mechanical analysis of copper-encapsulated NaNO3-KNO3. Chem. Eng. Res. Des., 93, 224–231.
Abstract: The present paper presents a numerical study to investigate and assess the heat transfer behavior of a copper and salt composite. A mixture of nitrates, KNO3-NaNO3, within a deformable spherical shell coating of copper will be used as an encapsulated phase change material, E-PCM. In the context of a thermo-mechanical analysis of this E-PCM, a simulation is proposed to determine its storage capacity and properties The melting, or solidification of the encapsulated PCM particles do not provoke cracking of the deformable shell. (C) 2014 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
|
Simon, F., Ruiz-Valero, L., Girard, A., & Galleguillos, H. (2023). Experimental and Numerical Analysis of a PCM-Integrated Roof for Higher Thermal Performance of Buildings. J. Therm. Sci., Early Access.
Abstract: Phase change materials (PCMs) designate materials able to store latent heat. PCMs change state from solid to liquid over a defined temperature range. This process is reversible and can be used for thermo-technical purposes. The present paper aims to study the thermal performance of an inorganic eutectic PCM integrated into the rooftop slab of a test room and analyze its potential for building thermal management. The experiment is conducted in two test rooms in Antofagasta (Chile) during summer, fall, and winter. The PCM is integrated into the rooftop of the first test room, while the roof panel of the second room is a sealed air cavity. The work introduces a numerical model, which is built using the finite difference method and used to simulate the rooms' thermal behavior. Several thermal simulations of the PCM room are performed for other Chilean locations to evaluate and compare the capability of the PCM panel to store latent heat thermal energy in different climates. Results show that the indoor temperature of the PCM room in Antofagasta varies only 21.1 degrees C +/- 10.6 degrees C, while the one of the air-panel room varies 28.3 degrees C +/- 18.5 degrees C. Under the experiment's conditions, the PCM room's indoor temperature observes smoother diurnal fluctuations, with lower maximum and higher minimum indoor temperatures than that of the air-panel room. Thermal simulations in other cities show that the PCM panel has a better thermal performance during winter, as it helps to maintain or increase the room temperature by some degrees to reach comfort temperatures. This demonstrates that the implementation of such PCM in the building envelope can effectively reduce space heating and cooling needs, and improve indoor thermal comfort in different climates of Chile.
|
Zhang, H. L., Baeyens, J., Degreve, J., Caceres, G., Segal, R., & Pitie, F. (2014). Latent heat storage with tubular-encapsulated phase change materials (PCMs). Energy, 76, 66–72.
Abstract: Heat capture and storage is important in both solar energy projects and in the recovery of waste heat from industrial processes. Whereas heat capture will mostly rely on the use of a heat carrier, the high efficiency heat storage needs to combine sensible and latent heat storage with phase change materials (PCMs) to provide a high energy density storage. The present paper briefly reviews energy developments and storage techniques, with special emphasis on thermal energy storage and the use of PCM. It thereafter illustrates first results obtained when encapsulating NaNO3/KNO3-PCM in an AISI 321 tube, as example of a storage application using a multi-tubular exchanger filled with PCM. To increase the effective thermal conductivity of the PCM, 2 inserts i.e. metallic foam and metallic sponge are also tested. Experimental discharging (cooling) rates are interpreted by both solving the unsteady-state conduction equation, and by using Comsol Multiphysics. Predictions and experimental temperature evolutions are in fair agreement, and the effect of the inserts is clearly reflected by the increased effective thermal conductivity of the insert-PCM composite. Application of Comsol to predict the mechanical behavior of the system, when melting and associated expansion increase the internal pressure, demonstrates that the pressure build-up is far below the Young's modulus of the AISI 321 encapsulation and that this shell will not crack (C) 2014 Elsevier Ltd. All rights reserved.
|
