Martinez, C., Briones, F., Rojas, P., Aguilar, C., Guzman, D., & Ordonez, S. (2017). Microstructural and mechanical characterization of copper, nickel, and Cu-based alloys obtained by mechanical alloying and hot pressing. Mater. Lett., 209, 509–512.
Abstract: Mechanical alloying and uniaxial compaction were used to obtain configurations of: elemental powders of Cu and Ni; binary alloys (Cu-Ni and Cu-Zr); and a ternary alloy (Cu-Ni-Zr) under the same mechanical milling and hot pressing conditions. Microstructure and mechanical properties of these were investigated. According to XRD results, hot pressing process increases crystallite size and decreases microstrain in the compact samples, due to the release of crystalline defects without crystallization of amorphous alloys. The milled powder samples have a higher hardness than the unmilled samples, since crystal defects are incorporated into microstructural refinement during milling. The ternary alloy Cu-40Ni-10Zr had the highest hardness of all systems studied, reaching 689 HV0.5. Compression tests at 5% strain determined that Zr-containing samples (amorphous phase) become more fragile after processing, and have the lowest values of compressive strength. In contrast, Ni samples and Cu-Ni binary alloys are more resistant to compression. (
|
Pavissich, J. P., Vargas, I. T., Gonzalez, B., Pasten, P. A., & Pizarro, G. E. (2010). Culture dependent and independent analyses of bacterial communities involved in copper plumbing corrosion. J. Appl. Microbiol., 109(3), 771–782.
Abstract: Aims: This study used culture-dependent and culture-independent approaches to characterize bacterial communities in copper plumbing corrosion and to assess biofilm formation and copper resistance of heterotrophic bacteria isolated from copper pipes. Methods and Results: Water and copper pipes were collected from a cold-water household distribution system affected by 'blue water' corrosion and presenting biofilm formation. Corrosion-promoting ageing experiments were performed with conditioned unused copper pipes filled with unfiltered and filtered sampled water as nonsterile and sterile treatments, respectively. During 8 weeks, stagnant water within the pipes was replaced with aerated fresh water every 2 or 3 days. Total copper and pH were determined in sampled water, and copper pipe coupons were cut for microscopic analyses. Biofilms were extracted from field and laboratory pipes, and total DNA was isolated. Bacterial communities' composition was analysed by terminal restriction fragment length polymorphism (T-RFLP) and clonal libraries of 16S rRNA genes. Heterotrophic bacterial isolates were obtained from water and biofilm extracts and characterized in terms of biofilm formation capacity and copper minimum inhibitory concentration. The results indicated that copper concentration in stagnant water from nonsterile treatments was much higher than in sterile treatments and corrosion by-products structure in coupon surfaces was different. Multivariate analysis of T-RFLP profiles and clone sequencing showed significant dissimilarity between field and laboratory biofilm communities, and a low richness and the dominant presence of Gamma- and Betaproteobacteria in both cases. Several bacterial isolates formed biofilm and tolerated high copper concentrations. Conclusions: The study demonstrates microbially influenced corrosion (MIC) in copper plumbing. Gamma- and Betaproteobacteria dominated the corroded copper piping bacterial community, whose ability to form biofilms may be important for bacterial corrosion promotion and survival in MIC events. Significance and Impact of the Study: The characterization of micro-organisms that influence copper plumbing corrosion has significant implications for distribution system management and copper corrosion control.
|
Vargas, I. T., Fischer, D. A., Alsina, M. A., Pavissich, J. P., Pasten, P. A., & Pizarro, G. E. (2017). Copper Corrosion and Biocorrosion Events in Premise Plumbing. Materials, 10(9), 30 pp.
Abstract: Corrosion of copper pipes may release high amounts of copper into the water, exceeding the maximum concentration of copper for drinking water standards. Typically, the events with the highest release of copper into drinking water are related to the presence of biofilms. This article reviews this phenomenon, focusing on copper ingestion and its health impacts, the physicochemical mechanisms and the microbial involvement on copper release, the techniques used to describe and understand this phenomenon, and the hydrodynamic effects. A conceptual model is proposed and the mathematical models are reviewed.
|
Vera, R., Cruz, E., Bagnara, M., Araya, R., Henriquez, R., Diaz-Gomez, A., et al. (2018). Evaluation of anticorrosive coatings on carbon steel in marine environments: Accelerated corrosion test and field exposure. Int. J. Electrochem. Sci., 13(1), 898–914.
Abstract: This study assesses the behavior of two paint systems applied to A-36 steel, commonly used to cover industrial structures in marine environments. Accelerated tests were carried out in a salt spray chamber with a maximum of 3000 hours of exposure, while other tests were conducted in the field in five areas in Chile over a period of two years. Coatings were assessed with measurements of thickness, adherence, and blistering. The behaviors of these coatings were assessed using electrochemical impedance spectroscopy (EIS techniques, measuring the evolution of an impedance module at 0.1 Hz. The results show that, after two years of exposure or after 3000 hours in the salt spray chamber, the two coatings still present adequate protective properties, with an impedance module value log vertical bar Z vertical bar greater than 10(6) Omega cm(2). However, for all tests, comparing C5MB and C5IB coating systems, the latter is always less protective for the steel.
|
Vera, R., Valverde, B., Olave, E., Diaz-Gomez, A., Sanchez-Gonzalez, R., Munoz, L., et al. (2022). Corrosion Behavior of Copper Exposed in Marine Tropical Atmosphere in Rapa Nui (Easter Island) Chile 20 Years after MICAT. Metals, 12(12), 2082.
Abstract: Atmospheric corrosion of copper, exposed on a tropical island in the South-Central Pacific Ocean, was reported and compared with those of a very similar study at the same site conducted 20 years earlier. The new measurements-taken over three years of exposure, from 2010 to 2013-quantified corrosion by mass loss, characterized corrosion products by X-ray diffraction (DRX) and Raman techniques, observed the attack morphology by Scanning Electron Microscope (SEM), and evaluated the patina resistance using electrochemical techniques. The results showed a copper corrosivity category of C4, and the main copper patina compound, cuprite, was porous, nonhomogeneous, and thin. Electrochemical measurements showed cuprite layer growth as a function of the exposure time, and the morphology did not favor corrosion protection. Finally, when comparing the results to those of a study 22 years previous, the copper corrosion rates increased only slightly, even with increased contaminants associated with growing local populations and continuous tourism on the island.
|
