|
|
Cabrera, F., Torres, A., Campos, J. L., & Jeison, D. (2019). Effect of Operational Conditions on the Behaviour and Associated Costs of Mixed Microbial Cultures for PHA Production. Polymers, 11(2), 14 pp.
Abstract: Massive production and disposal of petrochemical derived plastics represent relevant environmental problems. Polyhydroxyalkanoates (PHA) are a renewable alternative that can even be produced from wastes. The production of PHA from acetate using mixed microbial cultures was studied. The effect of two key operational conditions was evaluated, i.e., substrate concentration and cycle length. The effects of these factors on several responses were studied using a surface response methodology. Several reactors were operated under selected conditions for at least 10 solids retention times to ensure stable operation. Results show that conditions providing higher PHA content involve lower biomass productivities. This has a great impact on biomass production costs. Results suggest then that PHA content alone may not be a reasonable criterion for determining optimal conditions for PHB production. If production costs need to be reduced, conditions that provide a lower PHA content in the selection reactor, but a higher biomass productivity may be of interest.
|
|
|
|
Cabrera, F., Torres-Aravena, A., Pinto-Ibieta, F., Campos, J. L., & Jeison, D. (2021). On-Line Control of Feast/Famine Cycles to Improve PHB Accumulation during Cultivation of Mixed Microbial Cultures in Sequential Batch Reactors. Int. J. Environ. Res. Public Health, 18(23), 12611.
Abstract: Production of polyhydroxyalkanoates (PHA) has generated great interest as building blocks for bioplastic production. Their production using mixed microbial cultures represents an interesting alternative, since it enables the use of organic wastes as a carbon source. Feast/famine strategy is a common way to promote selection of microorganisms with PHA accumulation capacity. However, when using waste sources, changes in substrate concentration are expected, that may affect performance and efficiency of the process. This study showed how the dissolved oxygen level can be used for online control of the cycle time, ensuring that the desired feast/famine ratio is effectively applied. An operation strategy is presented and validated, using sequential batch reactors fed with acetate as the carbon source. Production of polyhydroxybutyrate (PHB) was studied, which is the expected type of PHA to be synthetized when using acetate as substrate. Two reactors were operated by applying the proposed control strategy, to provide F/F ratios of 0.2 and 0.6, respectively. A third reactor was operated with a fixed cycle time, for comparison purposes. Results showed that the reactor that operated at an F/F ratio of 0.6 promoted higher biomass productivity and PHB content, as a result of a better use of available time, preventing unnecessary long famine times. The application of the tested strategy is a simple a reliable way to promote a better performance of feast/famine-based bioreactors involving mixed microbial cultures for PHB production.
|
|
|
|
Cofre, C., Campos, J. L., Valenzuela-Heredia, D., Pavissich, J. P., Camus, N., Belmonte, M., et al. (2018). Novel system configuration with activated sludge like-geometry to develop aerobic granular biomass under continuous flow. Bioresour. Technol., 267, 778–781.
Abstract: A novel continuous flow system with “flat geometry” composed by two completely mixed aerobic tanks in series and a settler was used to promote the formation of aerobic granular sludge. Making similarities of this system with a typical sequencing batch reactor (SBR), for aerobic granules cultivation, the value of the tank 1/tank 2 vol ratio and the biomass recirculation rate would correspond with the feast/famine length ratio and the length of the operational cycle, respectively, while the settler upflow liquid velocity imposed would be related to the settling time. From the three experiments performed the best results were obtained when the tank 1/tank 2 vol ratio was of 0.28, the sludge recycling ratio of 0.25 and the settler upflow velocity of 2.5 m/h. At these conditions the aggregates had settling velocities between 29 and 113 m/h, sludge volume index at 10 min (SVI10) of 70 mL/g TSS and diameters between 1.0 and 5.0 mm.
|
|
