Diaz, C., Belmonte, M., Campos, J. L., Franchi, O., Faundez, M., Vidal, G., et al. (2020). Limits of the anammox process in granular systems to remove nitrogen at low temperature and nitrogen concentration. Process Saf. Environ. Protect., 138, 349–355.
Abstract: When partial nitritation-anammox (PN-AMX) processes are applied to treat the mainstream in wastewater treatment plants (WWTPs), it is difficult to fulfil the total nitrogen (TN) quality requirements established by the European Union (<10g TN/m(3)). The operation of the anammox process was evaluated here in a continuous stirred tank reactor operated at 15 degrees C and fed with concentrations of 50 g TN/m(3) (1.30 +/- 0.23 g NO2- -N/g NH4+-N). Two different aspects were identified as crucial, limiting nitrogen removal efficiency. On the one hand, the oxygen transferred from the air in contact with the mixed liquor surface favoured the nitrite oxidation to nitrate (up to 75 %) and this nitrate, in addition to the amount produced from the anammox reaction itself, worsened the effluent quality. On the other hand, the mass transfer of ammonium and nitrite to be converted inside the anammox granules involves relatively large values of apparent affinity constants (k(NH4+app) : 0.50 g NH4+-N/m(3) ; k(NO2-app) 0.17 g NO2--N/m(3)) that favour the presence of these nitrogen compounds in the produced effluent. The careful isolation of the reactor from air seeping and the fixation of right hydraulic and solids retention times are expected to help the maintenance of stability and effluent quality. (C) 2020 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
|
Pedrouso, A., del Rio, A. V., Morales, N., Vazquez-Padin, J. R., Campos, J. L., & Mosquera-Corral, A. (2021). Mainstream anammox reactor performance treating municipal wastewater and batch study of temperature, pH and organic matter concentration cross-effects. Process Saf. Environ. Protect., 145, 195–202.
Abstract: The anammox process is an energy efficient promising alternative to biologically remove the nitrogen. Thus, a 5-L anammox granular reactor was inoculated with sludge coming from a sidestream partial nitritation and anammox reactor (>200 mg TN/L and 30 degrees C) and it was directly subjected to 15 +/- 1 degrees C treating mimicked municipal wastewater (50 mg TN/L). Results indicated that an acclimation period (commonly used) to progressive reach the mainstream conditions is not needed, shortening the start-up periods. The long-term anammox process stability was proved to treat synthetic wastewater with decreasing alkalinities and nitritified primary settled municipal wastewater. The low pH values (6.2 +/- 0.1) of the municipal wastewater fed did not affect the process stability. Residual organic matter concentrations augmented the nitrogen removal efficiency from 80 % (with the synthetic medium) to 92 % achieving effluent concentrations below 10 mg TN/L. Finally, the effect of pH (6-8), temperature (15-30 degrees C) and organic matter concentration (0-75 mg TOC/L) over the specific anammox activity (SA(Amx)) was evaluated at short-term. pH and temperature and their interactions exerted significant influence on the SAAmx value while the TOC concentrations itself did not significantly change the SA(AMX). (C) 2020 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
|